Researchers Ulvi Şeker
Ulvi Şeker profile image
Ulvi Şeker Prof. Dr. GAZI UNIVERSITY, FACULTY OF TECHNOLOGY
Publication 27 Review 16 CrossRef Cited 18
27 Publication
16 Review
18 CrossRef Cited

Research Fields

Industrial Product Design Mechanical Engineering Composite and Hybrid Materials CAD/CAM Systems Manufacturing Processes and Technologies (Excl. Textiles)

Institution

GAZI UNIVERSITY, FACULTY OF TECHNOLOGY

Popular Publications

The Effect of Cutting Paramaters on The Hole Quality and Tool Wear During The Drilling of Inconel 718
Authors: Turgay Kıvak , Kasım Habalı , Ulvi Şeker
Published: 2012 , Gazi University Journal of Science
DOI: -
CITED 0 FAVORITE 1 TOTAL DOWNLOAD COUNT 2312

0

1

2312

İşletmelerde İş Güvenliğinin Verimlilik Üzerine Etkilerinin Değerlendirilmesi
Authors: Savas Karamik , Ulvi Seker
Published: 2016 , Gazi University Journal of Science Part C: Design and Technology
DOI: -
CITED 0 FAVORITE 1 TOTAL DOWNLOAD COUNT 11556

0

1

11556

The Effect of Cutting Paramaters on The Hole Quality and Tool Wear During The Drilling of Inconel 718
Authors: Turgay Kıvak , Kasım Habalı , Ulvi Şeker
Published: 2012 , Gazi University Journal of Science
DOI: -
CITED 0 FAVORITE 1 TOTAL DOWNLOAD COUNT 1070

0

1

1070

Effect of drill geometry on hole quality and cutting performance
Authors: Mehtap Yavuz , Harun Gökçe , Çağlar Yavaş, İhsan Korkut , Ulvi Şeker
Published: 2017 , Sakarya University Journal of Science
DOI: 10.16984/saufenbilder.292019
CITED 4 FAVORITE 1 TOTAL DOWNLOAD COUNT 3822

4

1

3822

Verification with Finite Element Methods of Drilling Performance for Original Drill Geometry
Authors: Harun Gokce , Mehtap Yavuz , Hüseyin Gökçe , Ulvi Şeker
Published: 2017 , Gazi Journal of Engineering Sciences
DOI: -
CITED 0 FAVORITE 1 TOTAL DOWNLOAD COUNT 2039

0

1

2039

Publications

Investigation of Drawability of Al 1050 Sheet Metal Material
Authors: Yılmaz Çakış , Ahmet Özdemir , Ulvi Şeker , İbrahim Çiftçi
Published: 2023 , Journal of Polytechnic
DOI: 10.2339/politeknik.1206641
FAVORITE 0 TOTAL DOWNLOAD COUNT 677

0

677

The Effect of Friction Coefficient on Cutting Forces, Temperature and Cutting Tool Stresses in Machining Process
Authors: Mustafa Sekmen , Abdullah Kurt , Ulvi Şeker
Published: 2023 , Journal of the Institute of Science and Technology
DOI: 10.21597/jist.1208621
FAVORITE 1 TOTAL DOWNLOAD COUNT 292

1

292

Optimization of the Effect of Distance Between Fins (DBF) on Average Heatsink Temperature (AHT) in Liquid Cooling Systems of Computers by Finite Volume Analysis
Authors: Furkan Özsarı , Burak Özcan , Ulvi Şeker
Published: 2023 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1206042
FAVORITE 0 TOTAL DOWNLOAD COUNT 399

0

399

Experimental and Theoretical Investigation of the Effect of Gash Rake Angle on Drilling AISI 4140 Tempered Steel
Authors: Yafes Çavuş , Şükran Katmer , İsmail Tekaüt , Seçil Kurt , Harun Gökçe , Ulvi Şeker
Published: 2022 , Gazi Journal of Engineering Sciences
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 304

1

304

Analysis of The Effect of Tool Geometry and Machining Parameters on Surface Integrity Properties in Turning of AISI 316L Stainless Steel by Taguchi Method
Authors: Fırat Kafkas , Hüseyin Gürbüz , Ulvi Şeker
Published: 2022 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.1149757
FAVORITE 1 TOTAL DOWNLOAD COUNT 462

1

462

Experimental Optimization of Drilling Parameters in Tooling for Euro 7 Nozzle Production
Authors: Hakan Küçüktürk , Gökan Küçüktürk , Şükran Katmer , Çağlar Yavaş, Ulvi Şeker
Published: 2021 , International Journal of Automotive Science And Technology
DOI: 10.30939/ijastech..945993
FAVORITE 0 TOTAL DOWNLOAD COUNT 291

0

291

Dalga formlu parmak frezelerin AISI 316L paslanmaz çelik üzerindeki işleme performansının deneysel ve istatistiksel olarak araştırılması
Authors: Kutay Aydın , Şükran Katmer , Arif Gök , Ulvi Şeker
Published: 2021 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.881590
FAVORITE 1 TOTAL DOWNLOAD COUNT 469

1

469

AA-6082 T4 Alaşımının Tornalamasında Çok Kristalli Elmas (ÇKE) Takımlara Uygulanan Talaş Kırıcı Formlarının Kesme Kuvvetleri Üzerindeki Etkilerinin Araştırılması
Authors: Selçuk Yağmur , Müzeyyen Kübra Kaya , Ulvi Şeker
Published: 2021 , Gazi Journal of Engineering Sciences
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 491

1

491

The Effect of Different Cooling Methods to Hole Quality and Tool Life in the Drilling of AA7075 and AA2024 Aluminum Alloys
Authors: Ayşegül Çakır Şencan , Abdullah Duran , Ulvi Şeker
Published: 2020 , Manufacturing Technologies and Applications
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 550

1

550

Dynamic Analysis of the Runflat System
Authors: Cihan Pamuk , Ulvi Şeker , Ali Kalyon
Published: 2020 , Sinop University Journal of Natural Sciences
DOI: 10.33484/sinopfbd.654534
FAVORITE 0 TOTAL DOWNLOAD COUNT 752

0

752

AISI 316L çeliğinin tornalanmasında kesici takım formlarının yüzey bütünlüğü üzerine etkisi
Authors: Hüseyin Gürbüz , Ulvi Şeker , Fırat Kafkas
Published: 2019 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.454386
FAVORITE 1 TOTAL DOWNLOAD COUNT 924

1

924

Karbon fiber takviyeli kompozit (KFTK) malzemelerin frezelenmesinde delaminasyon ve kesme kuvvetlerinin değerlendirilmesi ve matematiksel modellenmesi
Authors: Selçuk Yağmur , Abdullah Kurt , Ulvi Şeker
Published: 2019 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.479616
FAVORITE 0 TOTAL DOWNLOAD COUNT 1077

0

1077

Mathematical Modeling of the Effect of Chip Breaker Forms on Cutting Forces
Authors: Hüseyin Gürbüz , Fikret Sönmez , Şehmus Baday , Ulvi Şeker
Published: 2018 , Batman University Journal of Life Sciences
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 1586

1

1586

Karbon Fiber Takviyeli Kompozit Malzemelerinin Frezelenmesinde Meydana Gelen Yüzey Pürüzlüğünün Değerlendirilmesi ve Matematiksel Modellenmesi
Authors: Selçuk Yağmur , Abdullah Kurt , Ulvi Şeker
Published: 2018 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.411033
FAVORITE 0 TOTAL DOWNLOAD COUNT 1486

0

1486

Analysis of the Effects of Drill Bit and Flute Geometry Design on Cutting Force by Taguchi Method
Authors: Güven Meral , Hakan Dilipak , Murat Sarıkaya , Ulvi Şeker
Published: 2017 , Mus Alparslan University Journal of Science
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 4075

1

4075

Effect of drill geometry on hole quality and cutting performance
Authors: Mehtap Yavuz , Harun Gökçe , Çağlar Yavaş, İhsan Korkut , Ulvi Şeker
Published: 2017 , Sakarya University Journal of Science
DOI: 10.16984/saufenbilder.292019
FAVORITE 1 TOTAL DOWNLOAD COUNT 3822

1

3822

AISI 1050 Çeliğinin Delinmesinde İtme Kuvvetinin Taguchi Metodu ile Optimizasyonu
Authors: Selçuk Yağmur , Ramazan Çakıroğlu , Adem Acır , Ulvi Şeker
Published: 2017 , Gazi University Journal of Science Part C: Design and Technology
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 668

0

668

Hastelloy X Süper Alaşımının Tornalanmasında Kriyojenik İşlem Uygulanan PVD Ve CVD Kaplamalı Takımların Performansının İncelenmesi
Authors: Gültekin Uzun , Selçuk Yagmur , İhsan Korkut , Ulvi Şeker
Published: 2017 , Gazi University Journal of Science Part C: Design and Technology
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 828

1

828

Investigation of the Effect of Drill Geometry on Tool Wear and Chip Formation
Authors: Mehtap Yavuz , Harun Gokce, Ulvi Şeker
Published: 2017 , Gazi Journal of Engineering Sciences
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 3918

1

3918

Verification with Finite Element Methods of Drilling Performance for Original Drill Geometry
Authors: Harun Gokce , Mehtap Yavuz , Hüseyin Gökçe , Ulvi Şeker
Published: 2017 , Gazi Journal of Engineering Sciences
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 2039

1

2039

Recycling of Cutting Fluids Used in Machining Process for Sustainable Production
Authors: Ayşegül Çakır , Nergizhan Kavak , Ulvi Şeker
Published: 2017 , Mühendis ve Makina
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 6187

0

6187

İşletmelerde İş Güvenliğinin Verimlilik Üzerine Etkilerinin Değerlendirilmesi
Authors: Savas Karamik , Ulvi Seker
Published: 2016 , Gazi University Journal of Science Part C: Design and Technology
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 11556

1

11556

Comparison of hole surface finishing processes with roller burnishing method applied in copper materials
Authors: Adnan Akkurt , Abdullah Kurt , Ahmet Özdemir , Ulvi Şeker
Published: 2014 , Gazi University Journal of Science
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 5305

0

5305

The Effect of Cutting Paramaters on The Hole Quality and Tool Wear During The Drilling of Inconel 718
Authors: Turgay Kıvak , Kasım Habalı , Ulvi Şeker
Published: 2012 , Gazi University Journal of Science
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 2312

1

2312

The Effect of Cutting Paramaters on The Hole Quality and Tool Wear During The Drilling of Inconel 718
Authors: Turgay Kıvak , Kasım Habalı , Ulvi Şeker
Published: 2012 , Gazi University Journal of Science
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 1070

1

1070

Investigation of the effects of different chip breaker forms on the cutting forces using artificial neural networks
Authors: Hüseyin Gurbuz , Abdullah Kurt , Ulvi Seker
Published: 2012 , Gazi University Journal of Science
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 770

0

770

CNC TORNA TEZGAHINDA AISI 304 ÇELİKLERİN İŞLENEMESİNDE OPTİMUM YÜZEY PÜRÜZLÜLÜĞÜNÜ SAĞLAYACAK KESME PARAMETRELERİNİN TESPİTİ
Authors: Özgür Tekaslan , Nedim Gezer, Ulvi Şeker
Published: 2008 , Journal of Science and Technology of Dumlupınar University
DOI: -
FAVORITE 1 TOTAL DOWNLOAD COUNT 1606

1

1606

Articles published in
Batman University Journal of Life Sciences
Batman University Journal of Life Sciences
Gazi Journal of Engineering Sciences
Gazi Journal of Engineering Sciences
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science
Gazi University Journal of Science
International Journal of Automotive Science And Technology
International Journal of Automotive Science And Technology
Journal of Polytechnic
Journal of Polytechnic
Journal of Science and Technology of Dumlupınar University
Journal of Science and Technology of Dumlupınar University
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Institute of Science and Technology
Journal of the Institute of Science and Technology
Manufacturing Technologies and Applications
Manufacturing Technologies and Applications
Mus Alparslan University Journal of Science
Mus Alparslan University Journal of Science
Mühendis ve Makina
Mühendis ve Makina
Sakarya University Journal of Science
Sakarya University Journal of Science
Sinop University Journal of Natural Sciences
Sinop University Journal of Natural Sciences
Editorship
Manufacturing Technologies and Applications
Manufacturing Technologies and Applications
Editor
Editorial Board Memberships
Alpha Journal of Engineering and Applied Sciences
Alpha Journal of Engineering and Applied Sciences

Reviews

Gazi University Journal of Science
Gazi University Journal of Science
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
International Journal of Automotive Science And Technology
International Journal of Automotive Science And Technology
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
Journal of Balıkesir University Institute of Science and Technology
Journal of Balıkesir University Institute of Science and Technology
Journal of Polytechnic
Journal of Polytechnic
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Faculty of Engineering and Architecture of Gazi University
Uludağ University Journal of The Faculty of Engineering
Uludağ University Journal of The Faculty of Engineering

Publications

Analysis of The Effect of Tool Geometry and Machining Parameters on Surface Integrity Properties in Turning of AISI 316L Stainless Steel by Taguchi Method
Authors: Fırat Kafkas , Hüseyin Gürbüz , Ulvi Şeker
Published: 2022 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.1149757
CITED 2 FAVORITE 1 TOTAL DOWNLOAD COUNT 462

2

1

462

Dalga formlu parmak frezelerin AISI 316L paslanmaz çelik üzerindeki işleme performansının deneysel ve istatistiksel olarak araştırılması
Authors: Kutay Aydın , Şükran Katmer , Arif Gök , Ulvi Şeker
Published: 2021 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.881590
CITED 3 FAVORITE 1 TOTAL DOWNLOAD COUNT 469

3

1

469

AISI 316L çeliğinin tornalanmasında kesici takım formlarının yüzey bütünlüğü üzerine etkisi
Authors: Hüseyin Gürbüz , Ulvi Şeker , Fırat Kafkas
Published: 2019 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.454386
CITED 9 FAVORITE 1 TOTAL DOWNLOAD COUNT 924

9

1

924

Effect of drill geometry on hole quality and cutting performance
Authors: Mehtap Yavuz , Harun Gökçe , Çağlar Yavaş, İhsan Korkut , Ulvi Şeker
Published: 2017 , Sakarya University Journal of Science
DOI: 10.16984/saufenbilder.292019
CITED 4 FAVORITE 1 TOTAL DOWNLOAD COUNT 3822

4

1

3822

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.