Researchers Barış Özlü
avatar
Barış Özlü Assoc. Prof. Dr. AKSARAY ÜNİVERSİTESİ
Publication 20 Review 29 CrossRef Cited 33 TR Dizin Cited 23
20 Publication
29 Review
33 CrossRef Cited
23 TR Dizin Cited
0000-0002-8594-1234

Research Fields

Engineering CAD/CAM Systems Flexible Manufacturing Systems Manufacturing Processes and Technologies (Excl. Textiles) Manufacturing Management Additive Manufacturing Machining Optimization in Manufacturing

Institution

AKSARAY ÜNİVERSİTESİ

Popular Publications

Investigation of Models Produced by Rapid Prototyping Technology Solid Ground Method the Dimensional Deviations and Surface Roughness
Authors: Barış Özlü , Okan Pısık, Halil Demir
Published: 2020 , Erzincan University Journal of Science and Technology
DOI: 10.18185/erzifbed.559785
CITED 1 FAVORITE 1 TOTAL DOWNLOAD COUNT 795

1

1

795

Publications

Investigation of the Effect of Cutting Parameters on Surface Roughness in Turning of AISI 420 Steel Using Finite Element Analysis and Taguchi Experimental Design
Authors: Barış Özlü , Levent Uğur , Aytaç Yıldız
Published: 2023 , Bayburt Üniversitesi Fen Bilimleri Dergisi
DOI: 10.55117/bufbd.1388187
FAVORITE 0 TOTAL DOWNLOAD COUNT 112

0

112

Investigation of Cutting Forces in Turning of AISI 316L Stainless Steel with Experimental and Finite Element Analysis on Prediction with Artificial Neural Networks
Authors: Barış Özlü , Levent Uğur
Published: 2023 , Journal of Gaziosmanpasa Scientific Research
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 67

0

67

Evaluation of Cutting Force Components in Turning of Monel 400 Nickel Based Superalloy and Modeling with Artificial Neural Networks
Authors: Barış Özlü , Levent Uğur
Published: 2023 , Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi
DOI: 10.54365/adyumbd.1340057
FAVORITE 0 TOTAL DOWNLOAD COUNT 155

0

155

Experimental and Statistical Evaluation of the Effects of Cutting Parameters on Surface Roughness in Milling of Freeform Thin-Walled AA 5083-H111 Alloy
Authors: Barış Özlü , Uğurcan Çelik , Halil Demir
Published: 2023 , Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
DOI: 10.35414/akufemubid.1145100
FAVORITE 0 TOTAL DOWNLOAD COUNT 251

0

251

Investigation of the Impacts of Cutting Parameters on Power Usage in Cryogenic-Assisted Turning of AISI 52100 Bearing Steel by FEM
Authors: Levent Uğur , Hakan Kazan , Barış Özlü
Published: 2022 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1182276
FAVORITE 0 TOTAL DOWNLOAD COUNT 294

0

294

COMPARISON WITH THREE-DIMENSIONAL COORDINATE MEASURING AND LASER SCANNING OF EFFECT OF FORM ERROR OF CUTTING PARAMETERS IN MILLING FREEFORM THIN-WALLED AA 5083-H111 ALLOY
Authors: Barış Özlü , Uğurcan Çelik , Halil Demir
Published: 2022 , Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
DOI: 10.17780/ksujes.1148052
FAVORITE 0 TOTAL DOWNLOAD COUNT 444

0

444

P20S Plastik Kalıp Çeliğinin Frezelenmesinde Kesme Parametrelerinin Yüzey Pürüzlülüğü ve Teorik Yorulma Ömrüne Etkisi
Authors: Barış Özlü
Published: 2022 , Gazi Journal of Engineering Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 259

0

259

Orta karbonlu DIN 41Cr4 çeliğin mikroyapısı, sertliği ve işlenebilirliği üzerine sıcak dövme ve soğutma koşullarının etkisinin değerlendirilmesi
Authors: Barış Özlü , Mahir Akgün , Halil Demir
Published: 2022 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.952713
FAVORITE 0 TOTAL DOWNLOAD COUNT 958

0

958

Optimization of Cutting Parameters Affecting Cutting Force and Surface Roughness in Machining of AISI P20 Die Steel
Authors: Mahir Akgün , Barış Özlü
Published: 2022 , Open Journal of Nano
DOI: 10.56171/ojn.1039567
FAVORITE 0 TOTAL DOWNLOAD COUNT 678

0

678

Investigation the effect of cutting parameters on surface roughness, kerf width and dross height in laser processing of AISI 304 stainless sheet material
Authors: İbrahim Cebeci , Barış Özlü , Halil Demir
Published: 2022 , Nigde Omer Halisdemir University Journal of Engineering Sciences
DOI: 10.28948/ngumuh.764983
FAVORITE 0 TOTAL DOWNLOAD COUNT 870

0

870

Evaluation of Cut Quality Based on Cutting Geometry and Machining Parameters in Laser Machining of Hardox 500 Steel
Authors: Nihal Eksilmez, Barış Özlü , Halil Demir
Published: 2022 , Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
DOI: 10.47495/okufbed.1010997
FAVORITE 0 TOTAL DOWNLOAD COUNT 390

0

390

Optimization of Cutting Parameters and Investigation of the Effect of Cutting Parameters on Hole Quality in Laser Drilling of Hardox 450 Steel
Authors: Fulya Çırakoğlu , Barış Özlü , Halil Demir
Published: 2021 , Bilecik Seyh Edebali University Journal of Science
DOI: 10.35193/bseufbd.977412
FAVORITE 0 TOTAL DOWNLOAD COUNT 708

0

708

Sleipner soğuk iş takım çeliğinin tornalanmasında kesme parametrelerinin kesme kuvveti, yüzey pürüzlülüğü ve talaş şekli üzerine etkisinin incelenmesi
Authors: Barış Özlü
Published: 2021 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.668169
FAVORITE 0 TOTAL DOWNLOAD COUNT 997

0

997

St-37 Malzemesinin Lazer Kesiminde İşleme Parametrelerinin Deneysel ve İstatiksel Olarak İncelenmesi
Authors: Barış Özlü
Published: 2021 , Fırat University Journal of Engineering Science
DOI: 10.35234/fumbd.769716
FAVORITE 0 TOTAL DOWNLOAD COUNT 7373

0

7373

Investigation of the Effect of Cutting Parameters on Cutting Quality in Laser Cutting of AISI 310 Quality Austenitic Stainless Steel Sheet Material
Authors: İbrahim Cebeci, Barış Özlü , Halil Demir
Published: 2020 , Journal of the Institute of Science and Technology
DOI: 10.21597/jist.764067
FAVORITE 0 TOTAL DOWNLOAD COUNT 635

0

635

Investigation of Models Produced by Rapid Prototyping Technology Solid Ground Method the Dimensional Deviations and Surface Roughness
Authors: Barış Özlü , Okan Pısık, Halil Demir
Published: 2020 , Erzincan University Journal of Science and Technology
DOI: 10.18185/erzifbed.559785
FAVORITE 1 TOTAL DOWNLOAD COUNT 795

1

795

The Effect of Mechanical Properties and the Cutting Parameters on Machinability of AISI 5140 Steel Cooled at High Cooling Rates After Hot Forging
Authors: Barış Özlü , Halil Demir , Mustafa Türkmen
Published: 2019 , Journal of Polytechnic
DOI: 10.2339/politeknik.479345
FAVORITE 0 TOTAL DOWNLOAD COUNT 1740

0

1740

Analysis and Optimization of Effects on Surface Roughness of Cutting Parameters on Turning of AA6061 Alloy
Authors: Barış Özlü , Mahir Akgün , Halil Demir
Published: 2019 , Gazi Journal of Engineering Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1504

0

1504

THE INVESTIGATION OF SURFACE ROUGHNESS AND CUTTING FORCES OF STEELS COOLED IN SAND AND AIR AFTER HOT FORGING
Authors: Barış Özlü , Halil Demir , Mustafa Türkmen , Süleyman Gündüz
Published: 2019 , Technological Applied Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1169

0

1169

THE MATHEMATICAL MODELING OF PARAMETERS EFFECTING SURFACE ROUGHNESS AND CUTTING FORCE DURING CNC TURNING PROCESS
Authors: Barış Özlü , Halil Demir , Engin Nas
Published: 2014 , İleri Teknoloji Bilimleri Dergisi
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 7313

0

7313

Articles published in
Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi
Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Bayburt Üniversitesi Fen Bilimleri Dergisi
Bayburt Üniversitesi Fen Bilimleri Dergisi
Bilecik Seyh Edebali University Journal of Science
Bilecik Seyh Edebali University Journal of Science
Erzincan University Journal of Science and Technology
Erzincan University Journal of Science and Technology
Fırat University Journal of Engineering Science
Fırat University Journal of Engineering Science
Gazi Journal of Engineering Sciences
Gazi Journal of Engineering Sciences
İleri Teknoloji Bilimleri Dergisi
İleri Teknoloji Bilimleri Dergisi
Journal of Gaziosmanpasa Scientific Research
Journal of Gaziosmanpasa Scientific Research
Journal of Polytechnic
Journal of Polytechnic
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Institute of Science and Technology
Journal of the Institute of Science and Technology
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Manufacturing Technologies and Applications
Manufacturing Technologies and Applications
Nigde Omer Halisdemir University Journal of Engineering Sciences
Nigde Omer Halisdemir University Journal of Engineering Sciences
Open Journal of Nano
Open Journal of Nano
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Technological Applied Sciences
Technological Applied Sciences

Reviews

Alpha Journal of Engineering and Applied Sciences
Alpha Journal of Engineering and Applied Sciences
Celal Bayar University Journal of Science
Celal Bayar University Journal of Science
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
El-Cezeri
El-Cezeri
Firat University Journal of Experimental and Computational Engineering
Firat University Journal of Experimental and Computational Engineering
Gazi Journal of Engineering Sciences
Gazi Journal of Engineering Sciences
International Journal of 3D Printing Technologies and Digital Industry
International Journal of 3D Printing Technologies and Digital Industry
International Journal of Technological Sciences
International Journal of Technological Sciences
Journal of Advanced Research in Natural and Applied Sciences
Journal of Advanced Research in Natural and Applied Sciences
Journal of the Institute of Science and Technology
Journal of the Institute of Science and Technology
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Kocaeli Üniversitesi Fen Bilimleri Dergisi
Kocaeli Üniversitesi Fen Bilimleri Dergisi
Mühendis ve Makina
Mühendis ve Makina
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology

Publications

Evaluation of Cutting Force Components in Turning of Monel 400 Nickel Based Superalloy and Modeling with Artificial Neural Networks
Authors: Barış Özlü , Levent Uğur
Published: 2023 , Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi
DOI: 10.54365/adyumbd.1340057
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 155

1

0

155

Experimental and Statistical Evaluation of the Effects of Cutting Parameters on Surface Roughness in Milling of Freeform Thin-Walled AA 5083-H111 Alloy
Authors: Barış Özlü , Uğurcan Çelik , Halil Demir
Published: 2023 , Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
DOI: 10.35414/akufemubid.1145100
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 251

2

0

251

Investigation of the Impacts of Cutting Parameters on Power Usage in Cryogenic-Assisted Turning of AISI 52100 Bearing Steel by FEM
Authors: Levent Uğur , Hakan Kazan , Barış Özlü
Published: 2022 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1182276
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 294

3

0

294

Optimization of Cutting Parameters Affecting Cutting Force and Surface Roughness in Machining of AISI P20 Die Steel
Authors: Mahir Akgün , Barış Özlü
Published: 2022 , Open Journal of Nano
DOI: 10.56171/ojn.1039567
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 678

1

0

678

Optimization of Cutting Parameters and Investigation of the Effect of Cutting Parameters on Hole Quality in Laser Drilling of Hardox 450 Steel
Authors: Fulya Çırakoğlu , Barış Özlü , Halil Demir
Published: 2021 , Bilecik Seyh Edebali University Journal of Science
DOI: 10.35193/bseufbd.977412
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 708

3

0

708

Sleipner soğuk iş takım çeliğinin tornalanmasında kesme parametrelerinin kesme kuvveti, yüzey pürüzlülüğü ve talaş şekli üzerine etkisinin incelenmesi
Authors: Barış Özlü
Published: 2021 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.668169
CITED 5 FAVORITE 0 TOTAL DOWNLOAD COUNT 997

5

0

997

St-37 Malzemesinin Lazer Kesiminde İşleme Parametrelerinin Deneysel ve İstatiksel Olarak İncelenmesi
Authors: Barış Özlü
Published: 2021 , Fırat University Journal of Engineering Science
DOI: 10.35234/fumbd.769716
CITED 8 FAVORITE 0 TOTAL DOWNLOAD COUNT 7373

8

0

7373

Investigation of the Effect of Cutting Parameters on Cutting Quality in Laser Cutting of AISI 310 Quality Austenitic Stainless Steel Sheet Material
Authors: İbrahim Cebeci, Barış Özlü , Halil Demir
Published: 2020 , Journal of the Institute of Science and Technology
DOI: 10.21597/jist.764067
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 635

2

0

635

Investigation of Models Produced by Rapid Prototyping Technology Solid Ground Method the Dimensional Deviations and Surface Roughness
Authors: Barış Özlü , Okan Pısık, Halil Demir
Published: 2020 , Erzincan University Journal of Science and Technology
DOI: 10.18185/erzifbed.559785
CITED 1 FAVORITE 1 TOTAL DOWNLOAD COUNT 795

1

1

795

The Effect of Mechanical Properties and the Cutting Parameters on Machinability of AISI 5140 Steel Cooled at High Cooling Rates After Hot Forging
Authors: Barış Özlü , Halil Demir , Mustafa Türkmen
Published: 2019 , Journal of Polytechnic
DOI: 10.2339/politeknik.479345
CITED 7 FAVORITE 0 TOTAL DOWNLOAD COUNT 1740

7

0

1740

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods. : Click to get information about the DergiPark User Badge.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.