Araştırma Makalesi
BibTex RIS Kaynak Göster

Production of new type insulation material: Expanded Perlite-Silica aerogel composite

Yıl 2021, Cilt: 5 Sayı: 3, 95 - 99, 01.07.2021

Ömer Güler Öyküm Başgöz Çağdaş Yavuz

https://doi.org/10.31127/tuje.674035
Cited By: 1

Öz

Silica aerogel is a class of nanoporous material with extremely high porosity (85–99.9 %) and specific surface area (500–1200 m2/g), as in cause very low density, low thermal conductivity. But silica aerogel have some disadvantages. One of this disadvantages is high cost. In this study, to solve this problem has been used low cost precursor which is rice husk ash. Also, we try to improve porosity. To improve the porosity we used expanded perlite (EP). To produced EP is heated the perlite to 760–1100 °C, at which point its native water is converted to vapor and the material is caused to expand to 4–20 times its original volume, then the high-porosity and lightweight aggregates are formed. In this study silica aerogels have been reinforced with EP to product new type composite material which is used as building insulation material. The prepared EP-silica aerogel composite was characterized using SEM and BET measurements.

Anahtar Kelimeler

Expanded Perlite Silica aerogel Insulation building material

Destekleyen Kurum

Mersin Üniversitesi

Proje Numarası

2019-3-TP3-3764

Teşekkür

The authors would like to acknowledge the financial support of Mersin University Department of Scientific Research Projects

Kaynakça

  • ALOthman Z A (2012). A review: Fundamental aspects of silicate mesoporous materials. Materials, 5(12), 2874-2902. DOI: 10.3390/ma5122874
  • Aravind P R, Shajesh P, Soraru G D & Warrier K G K (2010). Ambient pressure drying: A successful approach for the preparation of silica and silica based mixed oxide aerogels. Journal of Sol-Gel Science and Technology, 54(1), 105-117. DOI: 10.1007/s10971-010-2164-2
  • Başgöz Ö & Güler Ö (2020). The unusually formation of porous silica nano-stalactite structure by high temperature heat treatment of SiO2 aerogel synthesized from rice hull. Ceramics International, 46(1), 370-380. DOI: 10.1016/j.ceramint.2019.08.271
  • Feng Q, Chen K, Ma D, Lin H, Liu Z, Qin S & Luo Y (2018). Synthesis of high specific surface area silica aerogel from rice husk ash via ambient pressure drying. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 539, 399-406. DOI: 10.1016/j.colsurfa.2017.12.025
  • Gregg S J, Sing K S W & Salzberg H W (1967). Adsorption surface area and porosity. Journal of the Electrochemical Society, 114(11), 279C.
  • Kistler S S (1931). Coherent expanded aerogels and jellies. Nature, 127, 741(3211). DOI: 10.1038/127741a0
  • Kistler S S (1932). Coherent expanded-aerogels. Rubber Chemistry and Technology, 5(4), 600-603. DOI: 10.5254/1.3539386
  • Li C, Cheng X, Li Z, Pan Y, Huang Y & Gong L (2017). Mechanical, thermal and flammability properties of glass fiber film/silica aerogel composites. Journal of Non-Crystalline Solids, 457, 52-59. DOI: 10.1016/j.jnoncrysol.2016.11.017
  • Liou T H & Yang C C (2011). Synthesis and surface characteristics of nanosilica produced from alkali-extracted rice husk ash. Materials science and engineering: B, 176(7), 521-529. DOI: 10.1016/j.mseb.2011.01.007
  • Ma X, Zhou B, Gao W, Qu Y, Wang L, Wang Z, & Zhu Y (2012). A recyclable method for production of pure silica from rice hull ash. Powder Technology, 217, 497-501. DOI: 10.1016/j.powtec.2011.11.009
  • Nurkowski D, Buerger P, Akroyd J, Mosbach S & Kraft M (2016). Skeletal chemical mechanism of high-temperature TEOS oxidation in hydrogen–oxygen environment. Combustion and Flame, 166, 243-254. DOI: 10.1016/j.combustflame.2016.01.025
  • Pichór W & Janiec A (2009). Thermal stability of expanded perlite modified by mullite. Ceramics International, 35(1), 527-530. DOI: 10.1016/j.ceramint.2007.10.008
  • Stolarski M, Walendziewski J, Steininger M & Pniak B (1999). Synthesis and characteristic of silica aerogels. Applied Catalysis A: General, 177(2), 139-148. DOI: 10.1016/S0926-860X(98)00296-8
  • Tang X, Sun A, Chu C, Yu M, Ma S, Cheng Y, Guo J & Xu G (2017). A novel silica nanowire-silica composite aerogels dried at ambient pressure. Materials & Design, 115, 415-421. DOI: 10.1016/j.matdes.2016.11.080
  • Wang J, Zhang Y, Wei Y & Zhang X (2015). Fast and one-pot synthesis of silica aerogels via a quasi-solvent-exchange-free ambient pressure drying process. Microporous and Mesoporous Materials, 218, 192-198. DOI: 10.1016/j.micromeso.2015.07.019
  • Wang L, Li Z, Jing Q & Liu P (2018). Synthesis of composite insulation materials—expanded perlite filled with silica aerogel. Journal of Porous Materials, 25(2), 373-382. DOI: 10.1007/s10934-017-0448-4
  • Yang H, Li C, Yue X, Huo J, Ye F, Liu J, Shi F & Ma J (2020). New BN/SiOC aerogel composites fabricated by the sol-gel method with excellent thermal insulation performance at high temperature. Materials & Design, 185, 108217. DOI: 10.1016/j.matdes.2019.108217
  • Zhou T, Cheng X, Pan Y, Li C, Gong L & Zhang H (2018). Mechanical performance and thermal stability of glass fiber reinforced silica aerogel composites based on co-precursor method by freeze drying. Applied Surface Science, 437, 321-328. DOI: 10.1016/j.apsusc.2017.12.146
  • Zulfiqar U, Subhani T & Husain S W (2015). Towards tunable size of silica particles from rice husk. Journal of Non-Crystalline Solids, 429, 61-69. DOI: 10.1016/j.jnoncrysol.2015.08.037

Yıl 2021, Cilt: 5 Sayı: 3, 95 - 99, 01.07.2021

Ömer Güler Öyküm Başgöz Çağdaş Yavuz

https://doi.org/10.31127/tuje.674035
Cited By: 1

Öz

Proje Numarası

2019-3-TP3-3764

Kaynakça

  • ALOthman Z A (2012). A review: Fundamental aspects of silicate mesoporous materials. Materials, 5(12), 2874-2902. DOI: 10.3390/ma5122874
  • Aravind P R, Shajesh P, Soraru G D & Warrier K G K (2010). Ambient pressure drying: A successful approach for the preparation of silica and silica based mixed oxide aerogels. Journal of Sol-Gel Science and Technology, 54(1), 105-117. DOI: 10.1007/s10971-010-2164-2
  • Başgöz Ö & Güler Ö (2020). The unusually formation of porous silica nano-stalactite structure by high temperature heat treatment of SiO2 aerogel synthesized from rice hull. Ceramics International, 46(1), 370-380. DOI: 10.1016/j.ceramint.2019.08.271
  • Feng Q, Chen K, Ma D, Lin H, Liu Z, Qin S & Luo Y (2018). Synthesis of high specific surface area silica aerogel from rice husk ash via ambient pressure drying. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 539, 399-406. DOI: 10.1016/j.colsurfa.2017.12.025
  • Gregg S J, Sing K S W & Salzberg H W (1967). Adsorption surface area and porosity. Journal of the Electrochemical Society, 114(11), 279C.
  • Kistler S S (1931). Coherent expanded aerogels and jellies. Nature, 127, 741(3211). DOI: 10.1038/127741a0
  • Kistler S S (1932). Coherent expanded-aerogels. Rubber Chemistry and Technology, 5(4), 600-603. DOI: 10.5254/1.3539386
  • Li C, Cheng X, Li Z, Pan Y, Huang Y & Gong L (2017). Mechanical, thermal and flammability properties of glass fiber film/silica aerogel composites. Journal of Non-Crystalline Solids, 457, 52-59. DOI: 10.1016/j.jnoncrysol.2016.11.017
  • Liou T H & Yang C C (2011). Synthesis and surface characteristics of nanosilica produced from alkali-extracted rice husk ash. Materials science and engineering: B, 176(7), 521-529. DOI: 10.1016/j.mseb.2011.01.007
  • Ma X, Zhou B, Gao W, Qu Y, Wang L, Wang Z, & Zhu Y (2012). A recyclable method for production of pure silica from rice hull ash. Powder Technology, 217, 497-501. DOI: 10.1016/j.powtec.2011.11.009
  • Nurkowski D, Buerger P, Akroyd J, Mosbach S & Kraft M (2016). Skeletal chemical mechanism of high-temperature TEOS oxidation in hydrogen–oxygen environment. Combustion and Flame, 166, 243-254. DOI: 10.1016/j.combustflame.2016.01.025
  • Pichór W & Janiec A (2009). Thermal stability of expanded perlite modified by mullite. Ceramics International, 35(1), 527-530. DOI: 10.1016/j.ceramint.2007.10.008
  • Stolarski M, Walendziewski J, Steininger M & Pniak B (1999). Synthesis and characteristic of silica aerogels. Applied Catalysis A: General, 177(2), 139-148. DOI: 10.1016/S0926-860X(98)00296-8
  • Tang X, Sun A, Chu C, Yu M, Ma S, Cheng Y, Guo J & Xu G (2017). A novel silica nanowire-silica composite aerogels dried at ambient pressure. Materials & Design, 115, 415-421. DOI: 10.1016/j.matdes.2016.11.080
  • Wang J, Zhang Y, Wei Y & Zhang X (2015). Fast and one-pot synthesis of silica aerogels via a quasi-solvent-exchange-free ambient pressure drying process. Microporous and Mesoporous Materials, 218, 192-198. DOI: 10.1016/j.micromeso.2015.07.019
  • Wang L, Li Z, Jing Q & Liu P (2018). Synthesis of composite insulation materials—expanded perlite filled with silica aerogel. Journal of Porous Materials, 25(2), 373-382. DOI: 10.1007/s10934-017-0448-4
  • Yang H, Li C, Yue X, Huo J, Ye F, Liu J, Shi F & Ma J (2020). New BN/SiOC aerogel composites fabricated by the sol-gel method with excellent thermal insulation performance at high temperature. Materials & Design, 185, 108217. DOI: 10.1016/j.matdes.2019.108217
  • Zhou T, Cheng X, Pan Y, Li C, Gong L & Zhang H (2018). Mechanical performance and thermal stability of glass fiber reinforced silica aerogel composites based on co-precursor method by freeze drying. Applied Surface Science, 437, 321-328. DOI: 10.1016/j.apsusc.2017.12.146
  • Zulfiqar U, Subhani T & Husain S W (2015). Towards tunable size of silica particles from rice husk. Journal of Non-Crystalline Solids, 429, 61-69. DOI: 10.1016/j.jnoncrysol.2015.08.037
Toplam 19 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Articles
Yazarlar

Ömer Güler 0000-0003-0190-9630

Öyküm Başgöz 0000-0002-0479-2389

Çağdaş Yavuz 0000-0002-6174-4383

Proje Numarası 2019-3-TP3-3764
Yayımlanma Tarihi 1 Temmuz 2021
Yayımlandığı Sayı Yıl 2021 Cilt: 5 Sayı: 3

Kaynak Göster

APA Güler, Ö., Başgöz, Ö., & Yavuz, Ç. (2021). Production of new type insulation material: Expanded Perlite-Silica aerogel composite. Turkish Journal of Engineering, 5(3), 95-99. https://doi.org/10.31127/tuje.674035
AMA Güler Ö, Başgöz Ö, Yavuz Ç. Production of new type insulation material: Expanded Perlite-Silica aerogel composite. TUJE. Temmuz 2021;5(3):95-99. doi:10.31127/tuje.674035
Chicago Güler, Ömer, Öyküm Başgöz, ve Çağdaş Yavuz. “Production of New Type Insulation Material: Expanded Perlite-Silica Aerogel Composite”. Turkish Journal of Engineering 5, sy. 3 (Temmuz 2021): 95-99. https://doi.org/10.31127/tuje.674035.
EndNote Güler Ö, Başgöz Ö, Yavuz Ç (01 Temmuz 2021) Production of new type insulation material: Expanded Perlite-Silica aerogel composite. Turkish Journal of Engineering 5 3 95–99.
IEEE Ö. Güler, Ö. Başgöz, ve Ç. Yavuz, “Production of new type insulation material: Expanded Perlite-Silica aerogel composite”, TUJE, c. 5, sy. 3, ss. 95–99, 2021, doi: 10.31127/tuje.674035.
ISNAD Güler, Ömer vd. “Production of New Type Insulation Material: Expanded Perlite-Silica Aerogel Composite”. Turkish Journal of Engineering 5/3 (Temmuz 2021), 95-99. https://doi.org/10.31127/tuje.674035.
JAMA Güler Ö, Başgöz Ö, Yavuz Ç. Production of new type insulation material: Expanded Perlite-Silica aerogel composite. TUJE. 2021;5:95–99.
MLA Güler, Ömer vd. “Production of New Type Insulation Material: Expanded Perlite-Silica Aerogel Composite”. Turkish Journal of Engineering, c. 5, sy. 3, 2021, ss. 95-99, doi:10.31127/tuje.674035.
Vancouver Güler Ö, Başgöz Ö, Yavuz Ç. Production of new type insulation material: Expanded Perlite-Silica aerogel composite. TUJE. 2021;5(3):95-9.

Cited By

Implementation of the PECVD process to produce a novel range of filler-polymer-coated perlites for use in epoxy composites
Journal of Industrial and Engineering Chemistry
https://doi.org/10.1016/j.jiec.2023.12.009
Flag Counter