Üstün mekanik ve durabilite özellikleri ile kükürt polimer betonlar (KPB)
geleneksel Portland çimento betonlarına (PÇB) alternatif yapı malzemesi olarak son
yıllarda ön plana çıkmıştır. Betonun önemli bir tasarım parametresi olan elastisite
modülü ile ilgili araştırmaların KPB’ler açısından literatürde yetersiz olduğu ve
standartlarda önerilen tahmin modellerinde halen göz önünde bulundurulmadığı
görülmektedir. Bundan dolayı bu çalışma kapsamında, KPB’lerin basınç dayanımıelastisite modülü ilişkisinin uluslararası standartlarca önerilmiş olan analitik
modeller ve geleneksel PÇB’ler ile karşılaştırmalı olarak incelenmesi amaçlanmıştır.
Deneysel çalışma sonucunda KBP’lerin elastisite modüllerinin, benzer basınç
dayanımı değerlerine sahip PÇB’lere göre daha düşük değerlerde kaldığı
belirlenmiştir. PÇB’ler için standartlarda önerilmiş olan analitik modellerin
KPB’lerin elastisite modülleri tahmininde ACI 363R-92 ve NS 3473 standartları
haricinde yaklaşık değerler elde edilemediği görülmüştür. Deneysel çalışmadaki
veriler kullanılarak bu çalışma kapsamında yeni bir analitik model önerilmiştir.
Önerilen analitik model, yakın sonuç veren standartlardaki modeller ile istatistiki
olarak karşılaştırmalı incelenmiş ve önerilen modelin deneysel değerlere en yakın
sonuçları verdiği belirlenmiştir
Kükürt Kükürt Polimer Beton Elastisite Modülü Basınç Dayanımı
Sulfur polymer concrete (SPC) with its superior mechanical and
durability properties has come to the fore in recent years as an alternative
construction material to traditional Portland cement concrete (PCC). It is seen that
the studies on the modulus of elasticity, which is an important design parameter of
concrete, are insufficient in the literature for SPC and are still not considered in the
prediction models suggested in the standards. This study aims to examine the
compressive strength-modulus of elasticity relationship of SPC comparatively with
analytical models proposed by international standards and traditional PPC. As a
result of the experimental study, it was determined that the modulus of elasticity of
SPC remained at lower values than PCC with similar compressive strength values. It
was observed that the analytical models proposed in the standards for PCC could
not obtain approximate values for the estimation of the modulus of elasticity of SPC,
except for the ACI 363R-92 and NS 3473 standards. A new analytical model was
proposed using the experimental data within the scope of this study. The proposed
analytical model was statistically compared with the models in the standards that
gave close results, and it was determined that the proposed model gave the closest
results to the experimental values.
Sulfur Sulfur Polymer Concrete Modulus of Elasticity Compressive Strength
Birincil Dil | Türkçe |
---|---|
Konular | Mühendislik |
Bölüm | Makaleler |
Yazarlar | |
Yayımlanma Tarihi | 25 Aralık 2023 |
Yayımlandığı Sayı | Yıl 2023 Cilt: 27 Sayı: 3 |
e-ISSN: 1308-6529