Araştırma Makalesi
BibTex RIS Kaynak Göster

Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines

Yıl 2020, Cilt: 23 Sayı: 4, 1371 - 1377, 01.12.2020

Furkan Üstünsoy Sadık Yıldız Ercan Nurcan Yılmaz Hasan Hüseyin Sayan Mustafa Burunkaya Cemal Yılmaz Mithat Bulut

https://doi.org/10.2339/politeknik.681807

Öz

The manual reaction approach to faults is exhibited in conventional grid. Manual operations are slow in many cases and resulting in big fault and power cut. Turkey has experienced it by living on March 31, 2015. The switching to smart grids is inevitable in order to minimize human errors and avoid big failures. It is a solution to turn the appropriate zones back to the island mode, especially in case of emergency load shedding due to the basic frequency. However, large power fluctuations occur in the microgrids when switching to the island mode or connecting to the grid. Therefore, In Matlab / Simulink, a microgrid is designed that can operate in island mode in accordance with the smart grid structure to minimize the damage of symmetrical and asymmetrical of high voltage lines on loads, grid and its components in this study. Also the effects of Superconducting Fault Current Limiter (SFCL) have been studied to limit power fluctuations in the microgrid when switching to island mode and exit island mode. In addition, autonomous maneuver management has been carried out on the designed high voltage line to prevent faults resulting in long term power cut.

Anahtar Kelimeler

Smart grid microgrid island mode SFCL

Kaynakça

  • 1. Yıldız S. and Burunkaya M., “Web Based Smart Meter for General Purpose Smart Home Systems with ESP8266”, 2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), Ankara, Turkey, (2019).
  • 2. Üstünsoy F. and Sayan H. H., “Sample Laboratory Work for Energy Management with SCADA Supported by PLC”, Journal of Polytechnic, 21:1007-1014, (2018).
  • 3. Li Z., Shahidehpour M., Aminifar F., Alabdulwahab A. and Al-Turki Y., “Networked Microgrids for Enhancing the Power System Resilience”, Proceedings of the IEEE, 105: 1289-1310, (2017).
  • 4. Venkata S. and Hatziargyriou N., “Grid resilience: Elasticity is needed when facing catastrophes”, IEEE Power Energy Mag., 13:16-23, (2015).
  • 5. Saleh A. K., Zeineldin H. H. and El-Saadany F. E., “Optimal Protection Coordination for Microgrids Considering N-1 Contingency”, IEEE Transactions on Industrial Informatics, 13: 2270-2278, (2017).
  • 6. Blackburn J. L. and Domin T. J., “Protective Relaying: Principles and Applications”,: CRC Press, Boca Raton, FL, USA, (2015).
  • 7. Chen L., Chen H., Li G., Xu Y., Ren L. and Tang Y., “Application of a Resistive Type Superconducting Fault Current Limiter for a DC Microgrid System”, 2018 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), Tianjin, China, (2018).
  • 8. Bayindir R., Hossain E., Kabalci E. and Perez R., “A Comprehensive Study on Microgrid Technology”, International Journal of Renewable Energy Research-IJRER, 4:1094-1107, (2014).
  • 9. Hatziargyriou N., “Microgrids: Architectures and Control. West Sussex”, Wiley, 4, U.K., (2014).
  • 10. Hooshyar A. and Iravani R., “A New Directional Element for Microgrid Protection”, IEEE Transactions on Smart Grid, 9:6862-6876, (2018).
  • 11. Lim S. and Lim S., “Analysis on Coordination of Over-Current Relay Using Voltage Component in a Power Distribution System With a SFCL”, IEEE Transactions on Applied Superconductivity,29:5, (2019).
  • 12. Monadi M., Gavriluta C., Luna A., Candela I. J. and Rodriguez P., “Centralized Protection Strategy for Medium Voltage DC Microgrids”, IEEE Transactions on Power Delivery, 32:430-440, (2017).
  • 13. Telukunta V., Pradhan J., Agrawal A., Singh M. and Garudachar S. S., “Protection Challenges Under Bulk Penetration of Renewable Energy Resources in Power Systems:A Review”, CSEE Journal of Power and Energy Systems, 3:365-379, (2017).
  • 14. Kong Y., Zhang B. and Hao Z., “Study of Ultra-High-Speed Protection of Transmission Lines Using a Directional Comparison Scheme of Transient Energy”, IEEE Transactions on Power Delivery,30:1317-1322, (2015).
  • 15. Zaki I. M., Sehiemy R. A. El., Amer M. G. and Enin F. M. A. El., “Sensitive/stable complementary fault identification scheme for overhead transmission lines”, IET Generation, Transmission & Distribution, 13:3252-3263, (2019).
  • 16. Abdullah A., “Ultrafast Transmission Line Fault Detection Using a DWT-Based ANN”, IEEE Transactions on Industry Applications, 54:1182-1193, (2017).
  • 17. Mohseni A., Yami M. S. and Akmal S. A. A., “Sensitivity Analysis and Stochastic Approach in Study of Transient Recovery Voltage with Presence of Superconducting FCL”, 2011 IEEE Electrical Power and Energy Conference, Winnipeg, MB, Canada, (2011).
  • 18. Li B. and He J., “Studies on the Application of R-SFCL in the VSC-Based DC Distribution System”, IEEE Transactions on Applied Superconductivity, 26:3, (2016).
  • 19. Yehia M. D., Mansour A. D. and Yuan W., “Fault Ride-Through Enhancement of PMSG Wind Turbines With DC Microgrids Using Resistive-Type SFCL”, IEEE Transactions on Applied Superconductivity, 28:4, (2018).
  • 20. Lawal O. K., Umar I., Abubakar B. and Mahmood M. K., “Performance Analysis of Surge Current Protection Using Superconductors”, European Scientific Journal, Edition, 10:19, (2014).
  • 21. Langston J., Steurer M., Woodruff S., Baldwin T. and Tang J., “A Generic Real-Time Computer Simulation Model for Superconducting Fault Current Limiters and Its Application in System Protection Studies”, IEEE Transactions on Applied Superconductivity,15:2090-2093, (2005).

Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines

Yıl 2020, Cilt: 23 Sayı: 4, 1371 - 1377, 01.12.2020

Furkan Üstünsoy Sadık Yıldız Ercan Nurcan Yılmaz Hasan Hüseyin Sayan Mustafa Burunkaya Cemal Yılmaz Mithat Bulut

https://doi.org/10.2339/politeknik.681807

Öz

The manual reaction approach to faults is exhibited in conventional grid. Manual operations are slow in many cases and resulting in big fault and power cut. Turkey has experienced it by living on March 31, 2015. The switching to smart grids is inevitable in order to minimize human errors and avoid big failures. It is a solution to turn the appropriate zones back to the island mode, especially in case of emergency load shedding due to the basic frequency. However, large power fluctuations occur in the microgrids when switching to the island mode or connecting to the grid. Therefore, In Matlab / Simulink, a microgrid is designed that can operate in island mode in accordance with the smart grid structure to minimize the damage of symmetrical and asymmetrical of high voltage lines on loads, grid and its components in this study. Also the effects of Superconducting Fault Current Limiter (SFCL) have been studied to limit power fluctuations in the microgrid when switching to island mode and exit island mode. In addition, autonomous maneuver management has been carried out on the designed high voltage line to prevent faults resulting in long term power cut.

Anahtar Kelimeler

Smart grid microgrid island mode SFCL

Kaynakça

  • 1. Yıldız S. and Burunkaya M., “Web Based Smart Meter for General Purpose Smart Home Systems with ESP8266”, 2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), Ankara, Turkey, (2019).
  • 2. Üstünsoy F. and Sayan H. H., “Sample Laboratory Work for Energy Management with SCADA Supported by PLC”, Journal of Polytechnic, 21:1007-1014, (2018).
  • 3. Li Z., Shahidehpour M., Aminifar F., Alabdulwahab A. and Al-Turki Y., “Networked Microgrids for Enhancing the Power System Resilience”, Proceedings of the IEEE, 105: 1289-1310, (2017).
  • 4. Venkata S. and Hatziargyriou N., “Grid resilience: Elasticity is needed when facing catastrophes”, IEEE Power Energy Mag., 13:16-23, (2015).
  • 5. Saleh A. K., Zeineldin H. H. and El-Saadany F. E., “Optimal Protection Coordination for Microgrids Considering N-1 Contingency”, IEEE Transactions on Industrial Informatics, 13: 2270-2278, (2017).
  • 6. Blackburn J. L. and Domin T. J., “Protective Relaying: Principles and Applications”,: CRC Press, Boca Raton, FL, USA, (2015).
  • 7. Chen L., Chen H., Li G., Xu Y., Ren L. and Tang Y., “Application of a Resistive Type Superconducting Fault Current Limiter for a DC Microgrid System”, 2018 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), Tianjin, China, (2018).
  • 8. Bayindir R., Hossain E., Kabalci E. and Perez R., “A Comprehensive Study on Microgrid Technology”, International Journal of Renewable Energy Research-IJRER, 4:1094-1107, (2014).
  • 9. Hatziargyriou N., “Microgrids: Architectures and Control. West Sussex”, Wiley, 4, U.K., (2014).
  • 10. Hooshyar A. and Iravani R., “A New Directional Element for Microgrid Protection”, IEEE Transactions on Smart Grid, 9:6862-6876, (2018).
  • 11. Lim S. and Lim S., “Analysis on Coordination of Over-Current Relay Using Voltage Component in a Power Distribution System With a SFCL”, IEEE Transactions on Applied Superconductivity,29:5, (2019).
  • 12. Monadi M., Gavriluta C., Luna A., Candela I. J. and Rodriguez P., “Centralized Protection Strategy for Medium Voltage DC Microgrids”, IEEE Transactions on Power Delivery, 32:430-440, (2017).
  • 13. Telukunta V., Pradhan J., Agrawal A., Singh M. and Garudachar S. S., “Protection Challenges Under Bulk Penetration of Renewable Energy Resources in Power Systems:A Review”, CSEE Journal of Power and Energy Systems, 3:365-379, (2017).
  • 14. Kong Y., Zhang B. and Hao Z., “Study of Ultra-High-Speed Protection of Transmission Lines Using a Directional Comparison Scheme of Transient Energy”, IEEE Transactions on Power Delivery,30:1317-1322, (2015).
  • 15. Zaki I. M., Sehiemy R. A. El., Amer M. G. and Enin F. M. A. El., “Sensitive/stable complementary fault identification scheme for overhead transmission lines”, IET Generation, Transmission & Distribution, 13:3252-3263, (2019).
  • 16. Abdullah A., “Ultrafast Transmission Line Fault Detection Using a DWT-Based ANN”, IEEE Transactions on Industry Applications, 54:1182-1193, (2017).
  • 17. Mohseni A., Yami M. S. and Akmal S. A. A., “Sensitivity Analysis and Stochastic Approach in Study of Transient Recovery Voltage with Presence of Superconducting FCL”, 2011 IEEE Electrical Power and Energy Conference, Winnipeg, MB, Canada, (2011).
  • 18. Li B. and He J., “Studies on the Application of R-SFCL in the VSC-Based DC Distribution System”, IEEE Transactions on Applied Superconductivity, 26:3, (2016).
  • 19. Yehia M. D., Mansour A. D. and Yuan W., “Fault Ride-Through Enhancement of PMSG Wind Turbines With DC Microgrids Using Resistive-Type SFCL”, IEEE Transactions on Applied Superconductivity, 28:4, (2018).
  • 20. Lawal O. K., Umar I., Abubakar B. and Mahmood M. K., “Performance Analysis of Surge Current Protection Using Superconductors”, European Scientific Journal, Edition, 10:19, (2014).
  • 21. Langston J., Steurer M., Woodruff S., Baldwin T. and Tang J., “A Generic Real-Time Computer Simulation Model for Superconducting Fault Current Limiters and Its Application in System Protection Studies”, IEEE Transactions on Applied Superconductivity,15:2090-2093, (2005).
Toplam 21 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Araştırma Makalesi
Yazarlar

Furkan Üstünsoy 0000-0003-3087-895X

Sadık Yıldız 0000-0003-4733-4684

Ercan Nurcan Yılmaz 0000-0001-9859-1600

Hasan Hüseyin Sayan 0000-0002-0692-172X

Mustafa Burunkaya 0000-0002-3971-0590

Cemal Yılmaz 0000-0002-2551-1603

Mithat Bulut Bu kişi benim 0000-0001-8927-3045

Yayımlanma Tarihi 1 Aralık 2020
Gönderilme Tarihi 29 Ocak 2020
Yayımlandığı Sayı Yıl 2020 Cilt: 23 Sayı: 4

Kaynak Göster

APA Üstünsoy, F., Yıldız, S., Yılmaz, E. N., Sayan, H. H., vd. (2020). Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines. Politeknik Dergisi, 23(4), 1371-1377. https://doi.org/10.2339/politeknik.681807
AMA Üstünsoy F, Yıldız S, Yılmaz EN, Sayan HH, Burunkaya M, Yılmaz C, Bulut M. Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines. Politeknik Dergisi. Aralık 2020;23(4):1371-1377. doi:10.2339/politeknik.681807
Chicago Üstünsoy, Furkan, Sadık Yıldız, Ercan Nurcan Yılmaz, Hasan Hüseyin Sayan, Mustafa Burunkaya, Cemal Yılmaz, ve Mithat Bulut. “Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines”. Politeknik Dergisi 23, sy. 4 (Aralık 2020): 1371-77. https://doi.org/10.2339/politeknik.681807.
EndNote Üstünsoy F, Yıldız S, Yılmaz EN, Sayan HH, Burunkaya M, Yılmaz C, Bulut M (01 Aralık 2020) Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines. Politeknik Dergisi 23 4 1371–1377.
IEEE F. Üstünsoy, “Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines”, Politeknik Dergisi, c. 23, sy. 4, ss. 1371–1377, 2020, doi: 10.2339/politeknik.681807.
ISNAD Üstünsoy, Furkan vd. “Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines”. Politeknik Dergisi 23/4 (Aralık 2020), 1371-1377. https://doi.org/10.2339/politeknik.681807.
JAMA Üstünsoy F, Yıldız S, Yılmaz EN, Sayan HH, Burunkaya M, Yılmaz C, Bulut M. Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines. Politeknik Dergisi. 2020;23:1371–1377.
MLA Üstünsoy, Furkan vd. “Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines”. Politeknik Dergisi, c. 23, sy. 4, 2020, ss. 1371-7, doi:10.2339/politeknik.681807.
Vancouver Üstünsoy F, Yıldız S, Yılmaz EN, Sayan HH, Burunkaya M, Yılmaz C, Bulut M. Autonomous Operation of Microgrid and Minimization of Fault in Case of Failure in High-Voltage Lines. Politeknik Dergisi. 2020;23(4):1371-7.
 
TARANDIĞIMIZ DİZİNLER (ABSTRACTING / INDEXING)
181341319013191 13189 13187 13188 18016

download Bu eser Creative Commons Atıf-AynıLisanslaPaylaş 4.0 Uluslararası ile lisanslanmıştır.