Research Article
Year 2009,
Volume: 13 Issue: 1, 60 - 65, 01.06.2009
Abstract
Bu çalışmada, volkanik kayaçiardan bazaltın takviye malzemesi olarak düşük yoğunluklu polietilen (DYPE)
matrikse, o/ol0-70 arasındaki değişen oranlarında ilave edilmesiyle elde edilen partikül dolgulu polimer matriksli
kompozitlerin değişik sürtünme hızlan ve sabit yük altında pin on disk aşınma davranışları incelenmiştir.
Aşınma testleri, atmosferik ortamda, 20 N yük altında AISI 4 140 çelik diskin 0.5 mis ve 1 .5 m/s dönırıe
hızlarında gerçekleştirilmiştir. Aşınma hızı ve sürtünme katsayısının, bazalt takviyesi ile azaldığı görülmüştür.
Bazalt takviyeli DYPE malzemenin kayma hızına ve bazaJt miktanna bağlı olarak, sürtünme katsayısı 0.1 1 ve
0.51, aşınma oranı 7.18xl04-2.60xl0-2mm3/m' arasında değişmektedir.
References
- Rehbein, P., Wallaschek, J., "Friction and wear behavior of polymer/steel and alumina/alumina un der high-frequency fretting conditions", Wear 216, 97-105, 1998.
- Rajesh, J.J., Bijwe, J., Tewari, U.S., "Abrasive wear performance of various polyamides'', Wear 252, 769-776, 2002.
- Gao, J., Mao, S., Liu, J., Feng, D., "Tribochemical effects of some polymers/stainless steel", Wear 212, 238-243, 1997.
- Babadur S., Zhang L., Anderegg, J.W., "The effect of zinc and copper oxides and other zinc compounds as fillers on the tribological behavior of therınosetting polyester", Wear 203-204, 464-473, 1997.
- Yu, L., Bahadur, S., Xue, Q., "An investigation of the friction and wear behaviors of ceramic particle fılled polyphenylene sulfide composites", Wear 214, 54-63, 1998.
- Suh, N.P., Mosleh, M., Arinez, J., "Tribology of polyethylene homocomposites", Wear 214, 231-236, 1998.
- Aoike, T., Yokoyama, D., Uehara, H., Yamanobe, T ., Komoto, T ., "Tribology of ultra-high molecular weight polyethylene disks molded at different temperatures", Wear 262, 742-748, 2007.
- Gueıınazi, N., Elleuch, K., Ayedi, H.F ., Fridrici, V., Kapsa, P.H., "Tribological behaviour of pipe coating in dry sliding contact with steel", Materials and Design, doi: 10.1 0 1 6/j .matdes.2008.12.003, 2009.
- Shipway, P.H., Hutchings, I.M., "Measurement of coating durability by solid particle erosion", Surf. Coat. Technol. 71, 1-8, 1 995.
- Iwai, Y., Honda, T., Yamada, H., Matsubara, T., Larsson, M., Hogmark, S., "Evaluation of wear resistance of thin hard coatings by a new solid particle impact test", Wear 25 1, 861867, 2001.
- [ l l]. Wood, R.J.K., Puget, Y., Trethewey, K.R., Stokes, K., "The perfoımance of marine coatings and pipe materials under fluid-bome san d erosion", Wear 2 19, 46-59, 1998.
- Iwai, Y., Numbu, K., "Slurry wear properties of pwnp lining materials", Wear 210, 2 1 1-219, 1 997.
- Hojo, H., Tsuda, K., Yabu, T., "Erosion Damage of Polymeric Material By Slurry", Wear 1 12, ı 7-28, 1 986.
- Stack, M.M., Pungwiwat, N., "Slurry erosion of metallics, polymers, and ceramics: particle size effects", Mater. Sci. Technol. 15, 337344, 1 999.
- Walley, S.M., Field, J.E., "The Erosion and Defornıation of Polyethylene By Solid-Particle Impact", Philosophical Transactions of The Royal Society of London Series A-Mathematical Physical and Engineering Sciences 321, .277-303, 1 987.
- Knuuttila, J., Ahmaniemi, S., Mantyla, T., "W et abrasion and slurry erosion resistance of thermally sprayed oxide coatings", Wear 232, 207212, ı 999.
- 7]. Oblozinsky, P ., U gai, K., Katagiri, M., Saitoh, K., Ishii, T., Masuda, T., Kuwabara K., "A design method for slurry trench wall stability in sandy ground based on the elasto-plastic FEM'' Computers and Geotechnics 28, 2 145-2 1 59, 2001.
- Mertiny, P., "Urethane-lined polymer composite pipe is designed to resist slurry hydrotransport abrasion and corrosion", Materials Performance 47, 1 6-18, 2008.
- Yabuki, A., Sugita, K., Matsumura, M., Hirashima, M., Tsunaga, M., "The anti-slurry erosion properties ofpolyethylene for sewerage pipe use", Wear 240, 52-58, 2000.
- Beall, G .H., Rittler, H.L., "Basalt glassceramics", Am. Ceram. Soc. Bull. 55, 579-582, 1 976.
- Yilmaz, S., Ozkan, O.T., Gunay, V., "Crystallization kineti es of hasalt glass", Ceramic Intemational 22, 477-481, 1 996.
- Znidarsic, V., Kolar, D., "The crystallization of diabase glass", J. Mater. Sci. 26, 2490--2494, 1 991.
- Karamanov, A., Arrizza, L., Ergul, S., "Sintered material from alkaline basaltic tuffs", Bazaıt Dolgulu Polimer Kompozitlerin Aşınma Davranışları A Alcıncı 65 Journal of the European Ceramic Society 29, 4, 595601, 2009.
- Myshki.n, N.K., Petrokovets, MJ., Kovalev, A.V., "Tribology of polymers: Adhesion, friction, wear, and mass-transfer", Tribology International 38, ı 1-12, 910-921, 2005 .
- Rosato, D.V., Schott, N .R., Rosato, M.G., "Plastics Engineering, Manufacturing and Data Handbook", Plastics Institute of America, Springer, 2006.
- Yang, J.M., Chen, H.S., Hsu, Y.G., Lin, F.H., Chang, Y.H., "Organic-inorganic hybrid solgel materials: 2 Application for dental composites", Die Angewandte Makromolek:ulare Chemie 25 1, 6172, 1 997.
- Vina, J., Garcia, M.A., Castrillo, M.A., V ina I. and Arguelles, A., "W ear behavior of a glass fiber-reinforced PEl composite", J oumal of Therınoplastic Composite Materials 21, 279-286, 2008.
Year 2009,
Volume: 13 Issue: 1, 60 - 65, 01.06.2009
Abstract
References
- Rehbein, P., Wallaschek, J., "Friction and wear behavior of polymer/steel and alumina/alumina un der high-frequency fretting conditions", Wear 216, 97-105, 1998.
- Rajesh, J.J., Bijwe, J., Tewari, U.S., "Abrasive wear performance of various polyamides'', Wear 252, 769-776, 2002.
- Gao, J., Mao, S., Liu, J., Feng, D., "Tribochemical effects of some polymers/stainless steel", Wear 212, 238-243, 1997.
- Babadur S., Zhang L., Anderegg, J.W., "The effect of zinc and copper oxides and other zinc compounds as fillers on the tribological behavior of therınosetting polyester", Wear 203-204, 464-473, 1997.
- Yu, L., Bahadur, S., Xue, Q., "An investigation of the friction and wear behaviors of ceramic particle fılled polyphenylene sulfide composites", Wear 214, 54-63, 1998.
- Suh, N.P., Mosleh, M., Arinez, J., "Tribology of polyethylene homocomposites", Wear 214, 231-236, 1998.
- Aoike, T., Yokoyama, D., Uehara, H., Yamanobe, T ., Komoto, T ., "Tribology of ultra-high molecular weight polyethylene disks molded at different temperatures", Wear 262, 742-748, 2007.
- Gueıınazi, N., Elleuch, K., Ayedi, H.F ., Fridrici, V., Kapsa, P.H., "Tribological behaviour of pipe coating in dry sliding contact with steel", Materials and Design, doi: 10.1 0 1 6/j .matdes.2008.12.003, 2009.
- Shipway, P.H., Hutchings, I.M., "Measurement of coating durability by solid particle erosion", Surf. Coat. Technol. 71, 1-8, 1 995.
- Iwai, Y., Honda, T., Yamada, H., Matsubara, T., Larsson, M., Hogmark, S., "Evaluation of wear resistance of thin hard coatings by a new solid particle impact test", Wear 25 1, 861867, 2001.
- [ l l]. Wood, R.J.K., Puget, Y., Trethewey, K.R., Stokes, K., "The perfoımance of marine coatings and pipe materials under fluid-bome san d erosion", Wear 2 19, 46-59, 1998.
- Iwai, Y., Numbu, K., "Slurry wear properties of pwnp lining materials", Wear 210, 2 1 1-219, 1 997.
- Hojo, H., Tsuda, K., Yabu, T., "Erosion Damage of Polymeric Material By Slurry", Wear 1 12, ı 7-28, 1 986.
- Stack, M.M., Pungwiwat, N., "Slurry erosion of metallics, polymers, and ceramics: particle size effects", Mater. Sci. Technol. 15, 337344, 1 999.
- Walley, S.M., Field, J.E., "The Erosion and Defornıation of Polyethylene By Solid-Particle Impact", Philosophical Transactions of The Royal Society of London Series A-Mathematical Physical and Engineering Sciences 321, .277-303, 1 987.
- Knuuttila, J., Ahmaniemi, S., Mantyla, T., "W et abrasion and slurry erosion resistance of thermally sprayed oxide coatings", Wear 232, 207212, ı 999.
- 7]. Oblozinsky, P ., U gai, K., Katagiri, M., Saitoh, K., Ishii, T., Masuda, T., Kuwabara K., "A design method for slurry trench wall stability in sandy ground based on the elasto-plastic FEM'' Computers and Geotechnics 28, 2 145-2 1 59, 2001.
- Mertiny, P., "Urethane-lined polymer composite pipe is designed to resist slurry hydrotransport abrasion and corrosion", Materials Performance 47, 1 6-18, 2008.
- Yabuki, A., Sugita, K., Matsumura, M., Hirashima, M., Tsunaga, M., "The anti-slurry erosion properties ofpolyethylene for sewerage pipe use", Wear 240, 52-58, 2000.
- Beall, G .H., Rittler, H.L., "Basalt glassceramics", Am. Ceram. Soc. Bull. 55, 579-582, 1 976.
- Yilmaz, S., Ozkan, O.T., Gunay, V., "Crystallization kineti es of hasalt glass", Ceramic Intemational 22, 477-481, 1 996.
- Znidarsic, V., Kolar, D., "The crystallization of diabase glass", J. Mater. Sci. 26, 2490--2494, 1 991.
- Karamanov, A., Arrizza, L., Ergul, S., "Sintered material from alkaline basaltic tuffs", Bazaıt Dolgulu Polimer Kompozitlerin Aşınma Davranışları A Alcıncı 65 Journal of the European Ceramic Society 29, 4, 595601, 2009.
- Myshki.n, N.K., Petrokovets, MJ., Kovalev, A.V., "Tribology of polymers: Adhesion, friction, wear, and mass-transfer", Tribology International 38, ı 1-12, 910-921, 2005 .
- Rosato, D.V., Schott, N .R., Rosato, M.G., "Plastics Engineering, Manufacturing and Data Handbook", Plastics Institute of America, Springer, 2006.
- Yang, J.M., Chen, H.S., Hsu, Y.G., Lin, F.H., Chang, Y.H., "Organic-inorganic hybrid solgel materials: 2 Application for dental composites", Die Angewandte Makromolek:ulare Chemie 25 1, 6172, 1 997.
- Vina, J., Garcia, M.A., Castrillo, M.A., V ina I. and Arguelles, A., "W ear behavior of a glass fiber-reinforced PEl composite", J oumal of Therınoplastic Composite Materials 21, 279-286, 2008.
There are 27 citations in total.
Details
| Primary Language | TR |
|---|---|
| Subjects | Engineering |
| Journal Section | Research Articles |
| Authors | |
| Publication Date | June 1, 2009 |
| Submission Date | April 14, 2014 |
| Published in Issue | Year 2009 Volume: 13 Issue: 1 |
Cite
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.