Gürültü
birçok diğer endüstri kolunda olduğu gibi doğal taş işleme tesislerinde de
önemli bir fiziksel risk etmenidir. Bu nedenle doğal taş kesme işlemlerinde
ortaya çıkan gürültü düzeyinin belirlenmesi işçi sağlığı ve güvenliği açısından
önemli olmaktadır. Doğal taş kesme işlemleri, elmas soketli dairesel testereler ile
gerçekleştirilmektedir. Kesimde kullanılan kayaç özellikleri ve kesme
parametreleri yanı sıra testerenin çapı, gövde kalınlığı ve soket yapısı kesim
sırasında oluşan gürültü şiddetini etkilemektedir. Bu çalışma kapsamında bir
adedi bor karbür katkısız (%0 B4C) referans testere olmak üzere 7
farklı oranda (%1, 2, 3, 4, 5, 6, 7 B4C) bor karbür katkılı dairesel
testere üretilmiştir. Üretilen bor karbür katkılı dairesel testereler ile gerçekleştirilen
kesme deneyleri esnasında ortaya çıkan gürültü değerlerindeki değişimler işçi
sağlığı ve iş güvenliği kapsamında incelenmiştir. Elde edilen veriler sonucunda
%1 B4C katkılı dairesel testerenin ortaya çıkarmış olduğu gürültü seviyesinin
en düşük olduğu belirlenmiş olup koruyucu elemanların kullanılması ile doğal
taş sektörüne işçi sağlığı açısından ayrıca bir katkısı olacağı
düşünülmektedir.
Süleyman Demirel Üniversitesi BAP
3100-D2-12
Yazarlar, 3100-D2-12 no’lu bilimsel araştırma projesi ile desteklenen bu çalışmadan dolayı Süleyman Demirel Üniversitesi BAP birimine ve bor karbür katkılı dairesel testerelerin üretiminde verdiği destekten dolayı Nergis Nek firmasına teşekkür ederler.
Noise is an
important physical risk factor in natural stone processing plants as in many
other industries. For this reason, determination of the noise level occurring
in natural stone cutting processes is important in terms of worker health and
safety. Natural stone cutting operations are carried out by circular saws with
diamond socket. In addition to the rock properties and cutting parameters, the
diameter of the saw body and the structure of the sockets affect the noise
intensity during cutting. In this study, a boron carbide non-doped (0% B4C)
saw and 7 different ratios (1, 2, 3, 4, 5, 6, 7% B4C) boron carbide
doped circular saws have been produced. Changes in noise levels during cutting
experiments performed with boron carbide doped circular saws were examined in
terms of worker health and safety. As a result of the data obtained, it was
determined that the noise level produced by circular saw with 1% B4C
was the lowest. The circular saw with 1% B4C is thought to
contribute to the natural stone sector in terms of worker health.
3100-D2-12
Primary Language | Turkish |
---|---|
Subjects | Engineering |
Journal Section | Research Article |
Authors | |
Project Number | 3100-D2-12 |
Publication Date | December 30, 2019 |
Submission Date | May 14, 2019 |
Acceptance Date | September 17, 2019 |
Published in Issue | Year 2019Volume: 3 Issue: 2 |
Aksaray J. Sci. Eng. | e-ISSN: 2587-1277 | Period: Biannually | Founded: 2017 | Publisher: Aksaray University | https://asujse.aksaray.edu.tr
ASUJSE is indexing&Archiving in